R Nine T Scrambler

0,00 + VAT

Kit R Nine T Scrambler

Exhaust:
Headpipe without Catalytic Converter:
Handlebars:
Headlight Protection Grill:
Tank Belt:
Padded Seat Cover in genuine Leather:
Luggage rack/Grip:
Bags:
For telephone assistance
call +39 335 8127818 or +39 329 8416473
from Monday to Friday
from 9:00 to 12:00 and
from 14:00 to 18:00
Saturday
from 9:00 to 12:00
Italy local time.
Visits by appointment only.
R Nine T Scrambler
Headlight fairing Nine T Scrambler 
Cod.:1624
Lightweight, made of special resin and carbon fiber with reinforcements.
It's flexible yet resistant material offers, despite its small size, a good shelter from the wind while maintaining a minimal design.
It comes complete with support and screws, ready for an easy assembly.
It integrates seamlessly with the original instrumentation of the bike and improves driving comfort.

Headlight protection grill
Cod.:1606 Grey
Cod.:1606 Black

It was not easy to build a headlight gril for the nineT.
We wanted a clean and minimalistic gril ... and I would say that we did it!
Available in black or natural steel, can be fitted in a couple of minutes without having to tamper with any of the original parts of the bike and can be removed at will.
PS: not approved for road use

Fork protection in neoprene
Cod.: 2002
These 2 protections in neoprene with Velcro fastening allow you to safeguard the forks and finish the part between the triple clamp. They are assembled in minutes without disassembling the fork.

Handlebar nine T
Cod.:1613 available in Low Ergo and Confort. 
For the nineT we wanted "Old School" handlebars with a constant diameter.
The result is fantastic, by only replacing the handlebars the bike gets really aggressive,and the driving position is much better.
Made of steel with powder coated matte black finish, it comes with everything you need to mount it on the original risers and fit the original controls.
It does not require any modifications to cables or brake lines.

Handlebar bumper
Cod.:1619 Brown
Cod.:1619 Black

Bumper made of leather, is mounted very easily on any handlebar crossbar and protects the face in case of a fall.

Tank belt 
Cod.:2006 Brown
Cod.:2006 Black

Tank belt made made in grain leather and stitched with nylon thread. complete with mounting brackets.
Handmade in Italy.
Gives the tank a vintage style and allows the mounting of our phone case Cod. 1607
The mounting kit includes a spacer to raise the aluminum gas cap, so in addition to securing the leather strap in the right position (see photo), no one will be able to remove it without the keys of the bike.

Tank Phone Case
Cod.:1607 Brown
Cod.:1607 Black

This accessory is mounted simply on our tank belt.
The transparent window on the front allows the use of the phone's touchscreen without taking it out.
Quickly removable when you get off the bike, by simply pulling the case from the Velcro base. Especially usefull to use your smart phone as a navigator or together with a bluetooth headset. 
Dimensions cm 90x170

Monoposto Seat in Canvas
Cod.:1602 Beige
Cod.:1602 Black
Solo seat of our realisation stitched handmade with cotton thread.
Much more comfortable and minimal, can be fitted without any modification to the bike as engaged and fixed in the same position as the original.
It allows mounting of the rear fender cod in 1614 and its handle Code 1616
The result is fantastic but also very clean and elegant.
Colours:
Cotton beige waterproof
Cotton Black waterproof

Cod.:1602 BrownLeather
Cod.:1602 BlackLeather

We have selected the best tanneries and chosen Italian origin leather not treated with pentachlorophenol.
Solo seat of our realisation handmade stitched with cotton thread.
Much more comfortable and minimal, can be fitted without any modification to the bike as engaged and fixed in the same position as the original.
It allows mounting of the rear fender cod.1614 and its handle Cod.1616
The result is fantastic but also very clean and elegant.

Monoposto seat grip
Cod.:1616
Made of steel with a matt black epoxy finishing.
Besides being very useful to move the bike around. It also completes the look of the back together with the monoposto seat and rear fender.
To be mounted only with our solo seat code 1602 and the rear fender cod 1614
Do not be mounted with the original seat

Rear fender
Cod.:1614 
Rear mudguard in ABS complete with mounting bracket and anti- vibration.
It fits perfectly with the back of the bike and the monoposto seat, it can be mounted also with the original plate holder.
But it definitely looks very nice combined with our Support plate rear light. cod 1604
With a Matt black finish and easily mountable.

Biposto seat nine T
Cod.:1601 Black
Biposto seat of our realisation stitched with cotton thread. 
Handmade in Italy
Much more comfortable and minimal, can be fitted without any modification to the bike.it is fixed in the same position as the original.
Colours:
Cotton beige waterproof
Black genuine leather.

Cod.:1601 BrownLeather
Cod.:1601 BlackLeather

Seat Biposto brat style in real leather.
We have selected the best tanneries and chosen Italian origin leather not treated with pentachlorophenol.
Handmade and sewn with cotton thread. With added gel layer for added comfort
Super light, with a new base dedicated to the NINET, it is mounted in the same location as the original and fit with no modifications to the bike.

Passenger grip
Cod.:1605
Made of steel with a matt black epoxy
If you do not want to lose your girlfriend ... you need this accessory!
Besides being very useful for the passenger it really completes the back of the bike.
To be mounted with the original dual seat or with our biposto seat. It can also be used to fasten straps of carrier bags.

Plate holder low
Cod.:1610
Made of tubular steel and aluminium with a matt black powder coated .
Complete of plate holder with supports for original or aftermarket arrows (arrows not included.)
Is provided with led light for the license plate.
The extra length of cable for the lights and arrows is included.
It is fixed to the telelever and allows you to change significantly the character and style of the bike, to fix the original taillight under the seat;you can use the support plate rear light code 1604.

Plate holder high nineT
Cod.:1630

Made in steel tube with epoxy powder-coat; complete with an aluminum plate holder with everything ready to accommodate the original rear light. It is very easy to fit and allows you to significantly change the character and style of the bike in the rear by shortening and raising the license plate and rear light. Complete with supports for the original or the aftermarket arrows (arrows not included.) and everything you need for a correct installation. It is compatible with our side pannier frames, passenger grip or rear luggage rack.
License plate dimensions: 185 x 185 mm

Support plate rear light nineT
Cod.:1604
Made of aluminum with matt black finish, allowing the mounting of the rear light under the chassis and the elimination of the original plastic support plate.
This suport plate mounted together with our plate holder low (cod. 1610) greatly shortens the back of the NINET, the result is fantastic!

Rear luggage rack with passenger grip
Cod.:2014
Luggage rack made of steel tubing with dull black epoxy powder coating.
Complete the rear part and is provided with handles for the passenger, it is very simply fixed to the frame by removing the seat.
Lightweight, practical and equipped with guides for fixing bags or trunks not dirty the aesthetics of the bike.
Mounts on nineT and nineT Scrambler models
NB: the 2 leather bands for fixing on the roof rack of the objects are not included and can be purchased separately
(Available in black or brown)

Side Pannier Canvas + Subframe NineT Series
Cod.:U001+1620
Bag made by hand in Italy in top quality waterproof rugged cotton. Treated in detail with leather trim 3 mm, simple and pure as the materials with which it was built. It attaches quickly to our subframe with the quick release system already included and mounted on the back of the bag, which is fitted with a lock to lock the bag onto the frame. Big enough to easily fit a 15" laptop, it is equipped with a large zipped pocket on the front for easy access to your phone and documents. Measurements: 32 cm Height (extendable in height up to 45 cm) width 24 cm depth 13 cm
Color :
Beige waxed canvas waterproof with brown leather trim
Black waxed canvas waterproof with brown  leather trim
Black waxed canvas waterproof with black leather trim
Green waxed canvas waterproof with brown leather trim

Waxed Suede Side Pannier + Subframe NineT Series
Cod.:U002+1620

Bag made by hand in Italy in top quality rugged split leather treated with wax to make it waterproof .
Treated in detail with leather trim 3 mm, simple and pure as the materials with which it was built.
It attaches quickly to our frame Luggage carrier rack with the quick release system applied to the back of the bag,
which is fitted with a lock to lock the bag onto the frame.
Big enough to easely fit a 15" laptop, it is equipped with a large zipped pocket on the front for easy acces to your phone and documents.
Measurements: 32 cm Hight, extendable in height up to 45 cm, width 24 cm depth 13 cm. (from 10 up to 14 liters)
Color : 
Waterproof waxed suede in Moss Grey with brown leather trim.
Waterproof waxed suede in Colorado Brown with brown leather trim.
Waterproof waxed suede in Jet Black with black leather trim.

Low Pipe + Support
Cod.:1611 Low+2023+U021SX
For the nine T we wanted a special exhaust, but also perfect for road use!
Steel exhaust with Titanium Silencer manufactured entirely by hand in perfect moto gp style.
It weighs around 3.4 kg less than the original and has a removable DB-Killer.
together with the complete exhaust we give you our support frame code 2023 to mount with the passenger frame.
The sound will make you crazy and the power ... also!
NB: Comes with full Homologation Report. 

Cod. 1611 Low Titanium+2023+U021SX
Low Pipe in titanium + Support

Double High Pipe NineT Scrambler Titanium
Cod.:2019+2x U021SX
For the nine T Scrambler we wanted a special exhaust, but also perfect for road use!
1700 grams of titanium processed entirely by hand, in perfect gp style.
With a weight of just 1,6kg it weighs around 3,1 kg less than the original and has a removable DB-Killer.
It easily mounts onto the original mount from the passenger frame.
If you want to remove the passenger frame and make the rear really aggressive,
you'll have to purchase the original BMW subframe code 77118358245 .
The sound will make you crazy and the power ... also!
NB: Comes with full Homologation Report.

Cod.:2019S+2xU021SX
Double High Pipe nine T Scrambler with visible welding

High pipe 1:2:1 nine T Scrambler
Cod.:2016+U021SX
For the nine T Scrambler we wanted a special exhaust, but also perfect for road use! Steel connector with titanium silencer entirely handmade,in perfect moto gp style.
It weighs about 2,8 kg lighter than the original and has a removable DB-Killer. It easily mounts onto the original mount from the passenger frame.
If you want to remove the passenger frame and make the rear really aggressive, you'll have to purchase the original BMW subframe code 77118358245 .
The sound will make you crazy and the power ... also!
NB: Full Homologation Report included.

Cod. 2016 Titanium+U021SX
High pipe 1:2:1 nine T Scrambler in Titanium with visible welds

Headpipe without Catalytic Converter
Cod.:1617
Stainless steel exhaust manifolds kit without catalyst.
Handmade, weighing 2,150 kg less than the original and improves engine output.

Cod.:1617 Titanium
Headpipe without Catalytic Converter Titanium

Cod.:1617 TitaniumS
Headpipe without Catalytic Converter Titanium with visible welding

Valve eliminator
Cod.:1618
Allows the elimination of the exhaust valve

Engine Protection Crash Bars
Cod.:1625

Made in treated steel with high resistance powder coat.
Easy to install, it comes complete with distance bushings and screws.
The majority of the maintenance work can be performed without disassembly of the bars.
NB: it also fits with the original cylinder protectors.

Front Fender Raising Kit
Cod.:2001

When you are looking to make your Scrambler more aggressive, this kit allows you to raise the front fender for a greater clearence around the front wheel. 

Bar end mirror
Cod.:1623

Mirror in Black anodized CNC milled aluminum. This single mirror can be mounted on the right or left side of the handlebar. The mirrors are always a problem for the finished look of the bike, but in this case we have solved this problem in a very minimalistic way.
Mirror diameter mm 72. For a correct and safe mounting: tighten the screws with the mirror in position, go for a test ride and then tighten again the screws.
 
R nine T Scrambler
We have developed a range of accessories ready to assemble, as always reversible, interchangeable and available separately, to customize and personalize your nine T Scrambler as you like, even with a few tweaks, eliminating weight and without having to damage any original parts.

With the configurator you can create the version you like best.

We have taken care of every detail to make your nine T Scrambler more staff but also more enjoyable.
noble materials; English cotton waterproof top quality, finish waxed leather, steel, titanium.
Several modular exhaust systems, APPROVED in different versions: high, low, double or single, with or without passenger frame.
All handmade in Italy.
Everything is ready for installation, fully reversible, in a few hours the R nine T Scrambler will become:
Your Scrambler

Good tuning

Unit has no connection with the BMW brand and / or its distributors. All products with trademarks, names or identification codes of motorcycles are intended solely as a reference to the use of accessories of our production. Riff. art. 1a R.D. 21/06/1942 n. 929 et seq.

In order to offer you the best we constantly improve our product details. The images may refer to a previous version.

 






Subscribe to our newsletter

Policy privacy

© 2016 Unitgarage | partita iva 04242270405