Kit R nineT

0,00 + VAT

Optional Kit R nineT

Front Fender:
Handlebar:
Tank Belt:
Seat:
Exhaust:
Headpipe without Catalytic Converter:
Pannier:
For telephone assistance
call +39 335 8127818 or +39 329 8416473
from Monday to Friday
from 9:00 to 12:00 and
from 14:00 to 18:00
Saturday
from 9:00 to 12:00
Italy local time.
Visits by appointment only.
Kit R nineT
Headlight protection grill
Cod.:1606
It was not easy to build a headlight gril for the nineT.
We wanted a clean and minimalistic gril ... and I would say that we did it!
Available in black or natural steel, can be fitted in a couple of minutes without having to tamper with any of the original parts of the bike and can be removed at will.
PS: not approved for road use

Fork protection in neoprene
Cod.:1612 velcro
These 4 protection tubes in neoprene with velcro allow you to safeguard the forks from damages and scratches. 
It is also a very simple and economical way to make the forks of the nineT look completely black
The result is fantastic !

Front fender
Cod.:1603
Replacing the original front fender, in a perfect "old scool" style. 
A steel support tube with a matt black epoxy finish connects to the original mounting points on the fork feet.
Complete with front fender in brushed aluminum with transparent finish that matches the look of the sides of the fuel tank.

Handlebar nine T
Cod.:1613
For the nineT we wanted "Old School" handlebars with a constant diameter.
The result is fantastic, by only replacing the handlebars the bike gets really aggressive,and the driving position is much better.
Made of steel with powder coated matte black finish, it comes with everything you need to mount it on the original risers and fit the original controls.
It does not require any modifications to cables or brake lines.

Handlebar bumper in brown leather
Cod.:1611 Brown
Bumper made of brown leather, is mounted very easily on any handlebar crossbar and protects the face in case of a fall.

Handlebar bumper in black leather
Cod.:1611 Black
Bumper made of black leather, is mounted very easily on any handlebar crossbar and protects the face in case of a fall.

Tank belt Brown
Cod.:1608 Brown
Tank belt made made in grain leather and stitched with nylon thread. complete with mounting brackets.
Handmade in Italy.
Gives the tank a vintage style and allows the mounting of our phone case Cod. 1607
The mounting kit includes a spacer to raise the aluminum gas cap, so in addition to securing the leather strap in the right position (see photo), no one will be able to remove it without the keys of the bike.

Tank belt Black
Cod.:1608 Black
Tank belt made made in grain leather and stitched with nylon thread. complete with mounting brackets.
Handmade in Italy.
Gives the tank a vintage style and allows the mounting of our phone case Cod. 1607
The mounting kit includes a spacer to raise the aluminum gas cap, so in addition to securing the leather strap in the right position (see photo), no one will be able to remove it without the keys of the bike

Tank Phone Case
Cod.:1607
This accessory is mounted simply on our tank belt.
The transparent window on the front allows the use of the phone's touchscreen without taking it out.
Quickly removable when you get off the bike, by simply pulling the case from the Velcro base. Especially usefull to use your smart phone as a navigator or together with a bluetooth headset. 
Dimensions cm 90x170

Monoposto Seat in Canvas
Cod.:1602 Beige
Cod.:1602 Black
Solo seat of our realisation stitched handmade with cotton thread.
Much more comfortable and minimal, can be fitted without any modification to the bike as engaged and fixed in the same position as the original.
It allows mounting of the rear fender cod in 1614 and its handle Code 1616
The result is fantastic but also very clean and elegant.
Colours:
Cotton beige waterproof
Cotton Black waterproof

Monoposto seat grip
Cod.:1616
Made of steel with a matt black epoxy finishing.
Besides being very useful to move the bike around. It also completes the look of the back together with the monoposto seat and rear fender.
To be mounted only with our solo seat code 1602 and the rear fender cod 1614
Do not be mounted with the original seat
Rear fender
Cod.:1614 
Rear mudguard in ABS complete with mounting bracket and anti- vibration.
It fits perfectly with the back of the bike and the monoposto seat, it can be mounted also with the original plate holder.
But it definitely looks very nice combined with our Support plate rear light. cod 1604
With a Matt black finish and easily mountable.

Biposto seat nine T
Cod.:1601
Biposto seat of our realisation stitched with cotton thread. 
Handmade in Italy
Much more comfortable and minimal, can be fitted without any modification to the bike.it is fixed in the same position as the original.
Colours:
Cotton beige waterproof
Black genuine leather.

Maniglia passeggero
Cod.:1605
Made of steel with a matt black epoxy
If you do not want to lose your girlfriend ... you need this accessory!
Besides being very useful for the passenger it really completes the back of the bike.
To be mounted with the original dual seat or with our biposto seat. It can also be used to fasten straps of carrier bags.

Plate holder low
Cod.:1610
Made of tubular steel and aluminium with a matt black powder coated .
Complete of plate holder with supports for original or aftermarket arrows (arrows not included.)
Is provided with led light for the license plate.
The extra length of cable for the lights and arrows is included.
It is fixed to the telelever and allows you to change significantly the character and style of the bike, to fix the original taillight under the seat;you can use the support plate rear light code 1604.

Support plate rear light nineT
Cod.:1604
Made of aluminum with matt black finish, allowing the mounting of the rear light under the chassis and the elimination of the original plastic support plate.
This suport plate mounted together with our plate holder low (cod. 1610) greatly shortens the back of the NINET, the result is fantastic!

Luggage carrier rack
Cod.:1609
Frame made of steel treated with a matt black epoxy.
Specially designed to integrates seamlessly with the rest of the bike.
Ready to host our quick release system, beautiful and minimal even when the bag is not mounted.
It comes complete with screws and can be mounted easily on the bike in the original configuration or with our accessories such as:
Support plate rear light cod 1604
Passenger grip cod 1605

Side Pannier
Cod.:1615
Bag made by hand in Italy in top quality waterproof rugged cotton .
Treated in detail with leather trim 3 mm, simple and pure as the materials with which it was built.
It attaches quickly to our frame Luggage carrier rack cod in 1609 with the quick release system applied to the back of the bag,
which is fitted with a lock to lock the bag onto the frame.
Big enough to easely fit a 15" laptop, it is equipped with a large zipped pocket on the front for easy acces to your phone and documents.
Measurements: 32 cm Hight (extendable in height up to 45 cm) width 24 cm depth 13 cm
Color: Cod 1615 Beige cod with brown leather trim
          Cod 1615 Black cod with brown leather trim
          Cod 1615 Military green with brown leather trim

Low pipe
Cod.:1611 Low
For the nine T we wanted a special pipe, but it is perfectly homologated for road use!
Terminal in titanium and steel connector completely hand made,in perfect moto gp style.
It weighs about 3.4 kg less than the original and has a removable DB-Killer.
It mounts easily in just a few minutes onto the passenger frame on the original anti-vibration grommet.
If you want to remove the passenger frame and make the rear of the bike really aggressive,
you'll have to buy our support. code "1611 supp low".
The sound will make you crazy,and the engine resposiveness ... as well!
NB: Full homologation report is valid worldwide


Support low pipe
Cod.:1611 low
This support allows the mounting of our low Muffler code 1611 LOW without the rear frame of the passenger.
Made of steel with a matt black epoxy powder, ready for assembly.
NB: the rubber anti-vibration grommet needs to be removed from the original passenger chassis and just added to our support
Related Products: Muffler cod in 1611 LOW

High pipe
Cod.:1611 High
For the nine T we wanted a special pipe , but it is perfectly homologated for road use!
Steel connector with titanium silencer entirely handmade,in perfect moto gp style.
It weighs about 2,8 kg lighter than the original and has a removable DB-Killer.
It mounts easily in just a few minutes onto the passenger frame on the original anti-vibration grommet.
If you want to remove the passenger frame and make the rear of the bike really aggressive,
you'll have to buy our support code "1611 supp high".
The sound will make you crazy,and the engine resposiveness ... as well!
NB: Full homologation report is valid worldwide

Support high pipe
Cod.:1611 supp high
This support allows the installation of our high pipe cod 1611 HIGH without the rear passenger frame.
Made of steel with a matt black epoxy. Comes with screws and is ready to mount.

Protection High pipe
Cod.:1611 Protection
Silencer protection in carbon and matt black finish.
It snaps to the passenger footrest support and secures the passenger from being burned.

Headpipe without Catalytic Converter
Cod.:1617
Stainless steel exhaust manifolds kit without catalyst.
Handmade, weighing 2,150 kg less than the original and improves engine output.

Valve eliminator
Cod.:1618
Allows the elimination of the exhaust valve
R nine T
We have developed a range of accessories ready to assemble, as always reversible, interchangeable and available separately, to customize and personalize your nine T as you like, even with a few tweaks, eliminating weight and without having to tamper with any of the original parts.

With the configurator you can create the version you like best.

We have taken care of every detail to make your nine T more personal but also more enjoyable.
Noble materials; waterproof top-quality English cotton, waxed leather finishes, steel, carbon, titanium.
A wonderful exhaust system fitted, homologated and vailable in two versions: high or low, mountable with or without the passenger frame.
All handcrafted and made in Italy.
Everything is ready for installation, all reversible, in a few hours the R nine T will become:
Your nine T

Good tuning,

Unit has no connection with the BMW brand and / or its distributors. All products with trademarks, names or identification codes of motorcycles are intended solely as a reference to the use of accessories of our production. Riff. art. 1a R.D. 21/06/1942 n. 929 et seq.






Subscribe to our newsletter

Policy privacy

© 2016 Unitgarage | partita iva 04242270405