Today free shipping in Europe for orders over € 300

Kit R NineT Pure

0,00 + VAT

Kit R NineT Pure

Exhaust and wheels:
Headpipe without Catalytic Converter:
Handlebars:
Headlight Protection Grill:
Tank Belt:
Seats:
Bags:
For assistance: info@unitgarage.com
Kit R NineT Pure
Headlight fairing NineT 
Cod.:1624
Lightweight, made of special resin and carbon fiber with reinforcements.
It's flexible yet resistant material offers, despite its small size, a good shelter from the wind while maintaining a minimal design.
It comes complete with support and screws, ready for an easy assembly.
It integrates seamlessly with the original instrumentation of the bike and improves driving comfort.

Headlight protection grill
Cod.:1606Grey
​Cod.:1606Black

It was not easy to build a headlight gril for the nineT.
We wanted a clean and minimalistic gril ... and I would say that we did it!
Available in black or natural steel, can be fitted in a couple of minutes without having to tamper with any of the original parts of the bike and can be removed at will.
PS: not approved for road use

Fork protection in neoprene
Cod.:2002
These 2 protections in neoprene with Velcro fastening allow you to safeguard the forks and finish the part between the triple clamp. They are assembled in minutes without disassembling the fork.

Handlebar nineT
Cod.:1613 available in Low Ergo and Confort. 
For the nineT we wanted "Old School" handlebars with a constant diameter.
The result is fantastic, by only replacing the handlebars the bike gets really aggressive,and the driving position is much better.
Made of steel with powder coated matte black finish, it comes with everything you need to mount it on the original risers and fit the original controls.
It does not require any modifications to cables or brake lines.

Handlebar bumper
Cod.:1619Brown
Cod.:1619Black

Bumper made of leather, is mounted very easily on any handlebar crossbar and protects the face in case of a fall.

Tank belt 
Cod.:2006Brown
Cod.:2006Black

Tank belt made made in grain leather and stitched with nylon thread. complete with mounting brackets.
Handmade in Italy.
Gives the tank a vintage style and allows the mounting of our phone case Cod. 1607
The mounting kit includes a spacer to raise the aluminum gas cap, so in addition to securing the leather strap in the right position (see photo), no one will be able to remove it without the keys of the bike.

Tank Phone Case
Cod.:1607Brown
Cod.:1607Black

This accessory is mounted simply on our tank belt.
The transparent window on the front allows the use of the phone's touchscreen without taking it out.
Quickly removable when you get off the bike, by simply pulling the case from the Velcro base. Especially usefull to use your smart phone as a navigator or together with a bluetooth headset. 
Dimensions cm 90x170

Monoposto Seat in Canvas
Cod.:1602Beige
Cod.:1602Black
Solo seat of our realisation stitched handmade with cotton thread.
Much more comfortable and minimal, can be fitted without any modification to the bike as engaged and fixed in the same position as the original.
It allows mounting of the rear fender cod in 1614 and its handle Code 1616
The result is fantastic but also very clean and elegant.
Colours:
Cotton beige waterproof
Cotton Black waterproof

Cod.:1602BrownLeather
Cod.:1602BlackLeather

We have selected the best tanneries and chosen Italian origin leather not treated with pentachlorophenol.
Solo seat of our realisation handmade stitched with cotton thread.
Much more comfortable and minimal, can be fitted without any modification to the bike as engaged and fixed in the same position as the original.
It allows mounting of the rear fender cod.1614 and its handle Cod.1616
The result is fantastic but also very clean and elegant.

Monoposto seat grip
Cod.:1616
Made of steel with a matt black epoxy finishing.
Besides being very useful to move the bike around. It also completes the look of the back together with the monoposto seat and rear fender.
To be mounted only with our solo seat code 1602 and the rear fender cod 1614
Do not be mounted with the original seat

Rear fender
Cod.:1614 
Rear mudguard in ABS complete with mounting bracket and anti- vibration.
It fits perfectly with the back of the bike and the monoposto seat, it can be mounted also with the original plate holder.
But it definitely looks very nice combined with our Support plate rear light. cod 1604
With a Matt black finish and easily mountable.

Biposto seat nineT
Cod.:1601Black
Biposto seat of our realisation stitched with cotton thread. 
Handmade in Italy
Much more comfortable and minimal, can be fitted without any modification to the bike.it is fixed in the same position as the original.
Colours:
Cotton beige waterproof
Black genuine leather.

Cod.:1601BrownLeather
Cod.:1601BlackLeather

Seat Biposto brat style in real leather.
We have selected the best tanneries and chosen Italian origin leather not treated with pentachlorophenol.
Handmade and sewn with cotton thread. With added gel layer for added comfort
Super light, with a new base dedicated to the nineT, it is mounted in the same location as the original and fit with no modifications to the bike.

Passenger grip
Cod.:1605
Made of steel with a matt black epoxy
If you do not want to lose your girlfriend ... you need this accessory!
Besides being very useful for the passenger it really completes the back of the bike.
To be mounted with the original dual seat or with our biposto seat. It can also be used to fasten straps of carrier bags.

Plate holder low
Cod.:1610
Made of tubular steel and aluminium with a matt black powder coated .
Complete of plate holder with supports for original or aftermarket arrows (arrows not included.)
Is provided with led light for the license plate.
The extra length of cable for the lights and arrows is included.
It is fixed to the telelever and allows you to change significantly the character and style of the bike, to fix the original taillight under the seat;you can use the support plate rear light code 1604.

Plate holder high nineT
Cod.:1630

Made in steel tube with epoxy powder-coat; complete with an aluminum plate holder with everything ready to accommodate the original rear light. It is very easy to fit and allows you to significantly change the character and style of the bike in the rear by shortening and raising the license plate and rear light. Complete with supports for the original or the aftermarket arrows (arrows not included.) and everything you need for a correct installation. It is compatible with our side pannier frames, passenger grip or rear luggage rack.
License plate dimensions: 185 x 185 mm

Support plate rear light nineT
Cod.:1604
Made of aluminum with matt black finish, allowing the mounting of the rear light under the chassis and the elimination of the original plastic support plate.
This suport plate mounted together with our plate holder low (cod. 1610) greatly shortens the back of the nineT, the result is fantastic!

Rear luggage rack with passenger grip
Cod.:2014
Luggage rack made of steel tubing with dull black epoxy powder coating.
Complete the rear part and is provided with handles for the passenger, it is very simply fixed to the frame by removing the seat.
Lightweight, practical and equipped with guides for fixing bags or trunks not dirty the aesthetics of the bike.
Mounts on nineT and nineT Scrambler models
NB: the 2 leather bands for fixing on the roof rack of the objects are not included and can be purchased separately
(Available in black or brown)

Side Pannier Canvas + Subframe NineT Series
Cod.:U001+1620
Bag made by hand in Italy in top quality waterproof rugged cotton. Treated in detail with leather trim 3 mm, simple and pure as the materials with which it was built. It attaches quickly to our subframe with the quick release system already included and mounted on the back of the bag, which is fitted with a lock to lock the bag onto the frame. Big enough to easily fit a 15" laptop, it is equipped with a large zipped pocket on the front for easy access to your phone and documents. Measurements: 32 cm Height (extendable in height up to 45 cm) width 24 cm depth 13 cm
Color :
Beige waxed canvas waterproof with brown leather trim
Black waxed canvas waterproof with brown  leather trim
Black waxed canvas waterproof with black leather trim
Green waxed canvas waterproof with brown leather trim

Waxed Suede Side Pannier + Subframe NineT Series
Cod.:U002+1620

Bag made by hand in Italy in top quality rugged split leather treated with wax to make it waterproof .
Treated in detail with leather trim 3 mm, simple and pure as the materials with which it was built.
It attaches quickly to our frame Luggage carrier rack with the quick release system applied to the back of the bag,
which is fitted with a lock to lock the bag onto the frame.
Big enough to easely fit a 15" laptop, it is equipped with a large zipped pocket on the front for easy acces to your phone and documents.
Measurements: 32 cm Hight, extendable in height up to 45 cm, width 24 cm depth 13 cm. (from 10 up to 14 liters)
Color : 
Waterproof waxed suede in Moss Grey with brown leather trim.
Waterproof waxed suede in Colorado Brown with brown leather trim.
Waterproof waxed suede in Jet Black with black leather trim.

Low pipe
Cod.:1611Low+U021SX
For the nineT we wanted a special pipe, but it is perfectly homologated for road use!
Terminal in titanium and steel connector completely hand made,in perfect moto gp style.
It weighs about 3.4 kg less than the original and has a removable DB-Killer.
It mounts easily in just a few minutes onto the passenger frame on the original anti-vibration grommet.
If you want to remove the passenger frame and make the rear of the bike really aggressive,
you'll have to buy our support. code "1611 supp low".
The sound will make you crazy,and the engine resposiveness ... as well!
NB: Full homologation report is valid worldwide

Cod.:1611LowT+U021SX
Low pipe nineT in Titanium

Support low pipe
Cod.:1611supplow
This support allows the mounting of our low Muffler code 1611 LOW without the rear frame of the passenger.
Made of steel with a matt black epoxy powder, ready for assembly.
NB: the rubber anti-vibration grommet needs to be removed from the original passenger chassis and just added to our support
Related Products: Muffler cod in 1611 LOW

Double Low Pipe Titanium with visible welding
Cod.:1631TitS+2xU021SX

For the nineT we wanted a special pipe, but also perfect for road use!
Terminal and connector in titanium completely hand made, in perfect moto gp style.
It weighs about 3,2 kg less than the original and has a removable DB-Killer.
It mounts easily in just a few minutes onto the passenger frame on the original anti-vibration grommet.
If you want to remove the passenger frame and make the rear of the bike really aggressive,
you'll have to buy our support. code "1611 supp low".
The sound will make you crazy, and the engine resposiveness ... as well!
NB: Comes with full homologation report. 

High pipe
Cod.:1611High+U021SX
For the nineT we wanted a special pipe , but it is perfectly homologated for road use!
Steel connector with titanium silencer entirely handmade,in perfect moto gp style.
It weighs about 2,8 kg lighter than the original and has a removable DB-Killer.
It mounts easily in just a few minutes onto the passenger frame on the original anti-vibration grommet.
If you want to remove the passenger frame and make the rear of the bike really aggressive,
you'll have to buy our support code "1611 supp high".
The sound will make you crazy,and the engine resposiveness ... as well!
NB: Full homologation report is valid worldwide

Cod.:1611HighTit+U021SX
High pipe in Titanium

Support high pipe
Cod.:1611supphigh
This support allows the installation of our high pipe cod 1611 HIGH without the rear passenger frame.
Made of steel with a matt black epoxy. Comes with screws and is ready to mount.

Cod.:1611supphighÖhlins
Support high pipe with Öhlins

Protection High pipe
Cod.:1611Protection
Silencer protection in carbon and matt black finish.
It snaps to the passenger footrest support and secures the passenger from being burned.

Headpipe without Catalytic Converter
Cod.:1617
Stainless steel exhaust manifolds kit without catalyst.
Handmade, weighing 2,150 kg less than the original and improves engine output.

Cod.:1617Tit
Headpipe without Catalytic Converter Titanium

Cod.:1617TitS
Headpipe without Catalytic Converter Titanium with visible welding

Valve eliminator
Cod.:1618
Allows the elimination of the exhaust valve

Engine Protection Crash Bars
Cod.:1625

Made in treated steel with high resistance powder coat.
Easy to install, it comes complete with distance bushings and screws.
The majority of the maintenance work can be performed without disassembly of the bars.
NB: it also fits with the original cylinder protectors.

Front Fender Raising Kit
Cod.:2001

When you are looking to make your Scrambler more aggressive, this kit allows you to raise the front fender for a greater clearence around the front wheel. 

Bar end mirror
Cod.:1623

Mirror in Black anodized CNC milled aluminum. This single mirror can be mounted on the right or left side of the handlebar. The mirrors are always a problem for the finished look of the bike, but in this case we have solved this problem in a very minimalistic way.
Mirror diameter mm 72. For a correct and safe mounting: tighten the screws with the mirror in position, go for a test ride and then tighten again the screws.
 
In order to offer you the best we constantly improve our product details. The images may refer to a previous version.
 






Subscribe to our newsletter

Privacy

© 2018 Unitgarage | partita iva 04242270405