Kit R115 G/S

0,00 + VAT

Optional Kit R115 G/S

Tank stickers:
Tank:
Seat:
Plate holder:
Silencer:
Headlight:

Model of your bike

Select the model of your bike:
For telephone assistance
call +39 335 8127818 or +39 329 8416473
from Monday to Friday
from 9:00 to 12:00 and
from 14:00 to 18:00
Saturday
from 9:00 to 12:00
Italy local time.
Kit R115 G/S

Configure your kit in the menu on the left, or buy a pre-configured kit choosing from the proposals below:



1 TANK STICKERS  € 44,00+VAT
2 PROTECTION STICKERS  € 12,00+VAT
3.1 TANK BELT IN GRAIN LEATHER  € 98,00+VAT
3.2 TANK BAG IN GRAIN LEATHER  € 148,00+VAT
4 HANDLEBAR BUMPER  € 20,00+VAT
5.1 SEAT COVERS  € 118,00+VAT
5.2 LONG SEAT  € 348,00+VAT
6 LUGGAGE CARRIER  € 175,00+VAT
7 REAR LUGGAGE BAG IN GRAIN LEATHER  € 192,00+VAT
8 PLATE HOLDER LOW € 198,00+VAT
9 SUPPORT FOR COVER PLASTIC SEAT  € 26,00+VAT
10.1 SILENCER  € 590,00+VAT
10.2 SAFETY GRILL PROTECTION FOR HIGH SILENCER  € 63,00+VAT
11 HOLDER SUPPORTS SOFT SUITCASES  € 138,00+VAT
12.1 RISER HANDLEBAR  € 149,00+VAT
12.2 SUBFRAME HEADLIGHT PRO  € 168,00+VAT
12.3 HEADLIGHT PRO  € 390,00+VAT
12.4 KIT FOR ORIGINAL INSTRUMENTS  € 165,00+VAT
12.5 KIT LOW OILCOOLER  € 188,00+VAT
12.6 FRONT FENDER  € 146,00+VAT
12.7 SUBFRAME HEADLIGHT BASIC  € 142,00+VAT
12.8 HEADLIGHT BASIC  € 155,00+VAT
13.1 WINDSHIELD FENOUIL  € 240,00+VAT
13.2 EXTENTION WINSHIELD FENOUIL  € 80,00+VAT
13.3 WINSHIELD GASTON  € 240,00+VAT
13.4 WINSHIELD HUBERT  € 165,0+VAT
14.1 PROTECTION GRILL FENOUIL  € 90,00+VAT
14.2 PROTECTION GRILL  € 90,00+VAT
15 DIGITAL INSTRUMENTATION WITH SUPPORT  € 232,00+VAT
16 FORK GAITERS  € 32,00+VAT
17 BAG TOOL HOLDER  € 45,00+VAT
 
FOR MORE OPTIONAL OR TO ACQUIRE ALL SPARE PARTS VISIT SPECIAL PARTS
 
1 TANK STICKERS
Cod. 1501
Cod. 1501A (STRIPS)
Stickers are available in two versions, protected with a special UV resistant film; they are pre-spaced and also partially applicable, for example only the written GS to achieve a more Basic look. Or eliminating the top part as in the ADV model.
Compatible with models: R850GS-R1100GS-R1150GS and R1150ADV
 
2 PROTECTION STICKERS
Cod. 1511
These are applied to prevent damage to the paint from rubbing your knees against the tank when off roading. It also give a more aggressive appearance to the tank.
Compatible with models: R850GS-R1100GS-R1150GS and R1150ADV

3.1 TANK BELT IN GRAIN LEATHER
Cod. 1509
Tank Belt made of top grain leather and stitched with nylon thread. Handmade in Italy. 
Gives the tank a vintage style and allows the mounting of the leather bag Cod. 122509_04.
All the parts needed for the assembly are provided.
Compatible with models: R850GS-R1100GS-R1150GS and R1150ADV
 
3.2 TANK BAG IN GRAIN LEATHER
Cod. 122509_04
Tank bag sewn with nylon thread, handmade in Italy. Dimensions: 160 x 220 mm, H 70.
Simple installation by slipping the supplied cradle under the tank bag.
The transparent window on the front pocket allows the use of a touch screen phone without taking it out.
Quickly removable when you get off the bike, it is designed to be worn on your belt.
Compatible with models: R850GS-R1100GS-R1150GS and R1150ADV
 
4 HANDLEBAR BUMPER
Cod. 1404
Classic off road bumper, easy to install. It protects your head from hitting the handlebar in case of a crash.
 
5.1 SEAT COVERS
Cod. 1502B (BLACK)
Cod. 1502BB (BLACK/BLUE)
Cod. 1502BO (BLACK/ORANGE)
Covers to cover the original seats. Available in three colors.
Made of high quality synthetic leather, radio frequency print on the top. Handmade stitching on the sides with cotton thread.
Easy to install with a stapler or if you preferby an upholsterer.
Choose the color in the configurator.
Compatible with models: R850GS-R1100GS and R1150GS (NO R1150ADV)
 
5.2 LONG SEAT
Cod. 1521B (BLACK)
Cod. 1521BO (BLACK/ORANGE)
Long saddle of our realization. Is proposed in two colors to choose in the configurator.
The ride height is the same as the original. Thanks to the particular shape of our saddle, which is closer and more rounded than the original one, the legs are less spread apart allowing the feet to touch the ground more easily.
Saddle made of high quality synthetic leather, stitching handmade with cotton thread.
These saddles are made and designed for long journeys.
Full subframe that uses the same mounting points as the original. In this way you can switch between this saddle and the two originals as you please.
Compatible with models: R850GS-R1100GS and R1150GS (NO R1150ADV)
 
6 LUGGAGE CARRIER
Cod.1503
Sturdy luggage rack made of steel tubing and aluminum plate with non-slip studs; treated with epoxy powder coat in high resistance matt black.
Much more compact than the original, you can shorten the tail and finish the frame at the rear.
It is provided with the plate and spacers Cod. 1518 for securing the original rear fender.
It is compatible with our Long seats Cod. 1521.
P.S. with this luggage rack you can not mount the  original passenger seat, but it looks fantastic whith the front seat.
Compatible with models: R850GS-R1100GS-R1150GS (NO R1150ADV)
 
7 REAR LUGGAGE BAG IN GRAIN LEATHER
Cod. 122509_01
Rear Luggage Bag GS grain leather with nylon thread hand madein Italy. For all GS model.
Size: mm 200 x 280, H 150
All the parts necessary for assembly are included.
The aluminum plate is positioned inside the bag and fixed with 4 screws to the brackets mounted on the rack as in next photo.
Compatible with all models

8 PLATE HOLDER LOW
Cod. 1515
Made from steel tubes painted with black epoxy powdercoat complete with plate holder with aluminum supports  for the arrows (arrows not included).
Mount a round minimalist light with chrome ring nut (bulbs included).The extra length of cable for lighthouse and arrows is included.
It is fixed on the mounting point of the original splash guard and allows you to significantly change the character and style of the bike in the back.
Compatible with models: R850GS-R1100GS-R1150GS-R1150ADV-R1150R
 
9 SUPPORT FOR COVER PLASTIC SEAT
Cod. 1512
This aluminum support allows you to mount the plastic cover with the BMW logo on the back of the frame perfectly refining it.
Will allow you to remove the rear fender and to characterize the tail of the bike very easily.
We advise you to mount it with the plate holder low Cod. 1515.
Compatible with models: R850GS-R1100GS-R1150GS (NO R1150ADV)
 
10.1 SILENCER
Cod. 1516
Silencer approved, hand-made stainless steel with TIG welding, improves engine response, with no changes in mappings.
Easy mounting, with removable dB-Killer, comes complete with springs, mounting bracket to the frame, fitting and screws.
The sound is fantastic and saving considerable weight, kg 1,850 less than the original silencer.
It makes it easy to remove the rear wheel in case of a puncture, without removing the silencer.
The lower part is provided with heat protection.
Looks fantastic on both the original bike and on your special.
Compatible with original suitcases and models: R850GS-R1100GS-R1150GS and R1150ADV
 
10.2 SAFETY GRILL PROTECTION FOR SILENCER
Cod. 1402
Made of steel treated with high-resistance powder coat, protects the legs of the passenger, the silencer in case of a fall, and completes the look of your bike.
Can be mounted exclusively on our silencer Cod. 1516.
 
11 HOLDER SUPPORTS SOFT SUITCASES
Cod. 1510This option allows you to mount soft bags to customise the back of the bike even more.
Constructed of steel treated with epoxy in matte black, mounting with or without the original plastic cases.
Are supplied in pairs, left + right, complete with screws and mounting accessories.
Compatible with models: R850GS-R1100GS-R1150GS (NO R1150ADV)

16 FORK GAITERS
Cod. 1522
Rubber fork gaiters of excellent quality, protect the stems when driving off-road, highly recommended especially if you want to mount the headlight round in the two versions.
Compatible with all models.

17 BAG TOOL HOLDER
Cod. 1517
Robust toolbag made and hand-sewn in very strong raw cotton and leather.
Reminiscent of the old R80 toolbags in size and shape; for your repairs in style.
Compatible with all models.

------------------------------------------------------------------
KIT FRONT HEADLIGHT PRO FENOUIL Cod. 1550F
This kit allows you to change the entire front of your GS. With a minimum of tools you can move the radiator in front of the engine, eliminating the “beak”.
Compatible with models: R850GS-R1100GS-R1150GS e R1150ADV

THE KIT FRONT HEADLIGHT PRO FENOUIL INCLUDES:

13.1 WINDSHIELD FENOUIL
1227AW (ALPINEWHITE)
1227MB (MATT BLACK)
Reminiscent of the legendary R80 GS PD revised and adapted for our KIT.
Lightweight, with finish in alpine.
It gives good wind protection and comes complete with mounting brackets.
12.1 RISER HANDLEBAR
Cod. 1504
CNC cut from a single piece of high quality aluminium. Anodised in Matt Black.
12.2 SUBFRAME HEADLIGHT
Cod. 1216
Made of steel with high resistance powder coatings.
It easily mounts on riser Code 1504 and allows the housing of the headlight, high front fender, arrows and optional screens.
It is designed to install the original tachograph.
12.3 HEADLIGHT
Cod. 1206
Fits two bulbs h11 (provided in the kit). The optical unit is the same as the R1200 R model, for high performance when driving at night. The casing is of our own production. 
It is fully adjustable and comes with all the wiring.
12.4 KIT FOR ORIGINAL INSTRUMENTS
Cod. 1508
Eliminating the splendid original instruments would be a pity, therefore we prepared a kit that allows you to mount speedometer, tachometer and warning lights.
(PS: the additional drivers information display must be removed)
12.5 KIT LOW OILCOOLER
Cod. 1506
Enables the relocation of the original radiator from the front to the front of the engine.
Consists of everything you need: rubber hoses, fittings, clamps and new radiator brackets.
12.6 FRONT FENDER
Cod. 1209AW (ALPINEWHITE)
Cod. 1209MB (MATT BLACK)
The kit offeres the front fender in two colors, pick your color in the configurator.
Following the lines of the GS 80, in a proposed finish of alpine; can be mounted easily and fastened in the special mounting points of the headlight frame Cod. 1216.

OPTIONAL AVAILABLE FOR KIT FRONT HEADLIGHT PRO FENOUIL:
13.2 EXTENSION WINSHIELD FENOUIL
Cod. 1227EXT
Extension in flexible and resistant material. While maintaining the minimalist design of the legendary windshield Fenouil, provides the same shelter of the original windshield GS. With this Extension you have maximum comfort for long trips without sacrificing the minimalist look of your R120 G / S. Comes complete with brackets and screws, ready for easy assembly.
IMPORTANT Can also be mounted on the windshield of the original R80 GS PD.
14.1 HEADLIGHT PROTECTION GRILL FENOUIL
Cod. 1227GRILL
For your off-road exits and travel more challenging with Fenouil windshield, you can not do without the headlight grille. Handmade in stainless steel treated with epoxy powder high strength, comes complete with everything needed for installation.
IMPORTANT Not approved for road use.

------------------------------------------------------------------
KIT FRONT FENDER PRO GASTON Cod. 1550G
This kit allows you to change the entire front of your GS eliminating beak full of light and move the original front of the engine radiator.
You can transform your GS enduro more radical versions, Classic or with a touch of color Racing.
Compatible with models: R850GS-R1100GS-R1150GS and R1150ADV

THE KIT FRONT HEADLIGHT PRO GASTON INCLUDES:
13.3 WINDSHIELD GASTON
Cod. 1207/115
Reproduces the look of the legendary R80 GS adapted and revised for our kit.
Made of special resin and MAT, carbon fiber reinforcements, MATT BLACK, transparent finish.
Given the small size can not be mounted with the original instruments but only with our Digital instrumentation Cod. 1513+1514.
12.1 RISER HANDLEBAR
Cod. 1504
CNC cut from a single piece of high quality aluminium. Anodised in Matt Black.
12.2 SUBFRAME HEADLIGHT
Cod. 1216
Made of steel with high resistance powder coatings.
It easily mounts on riser Code 1504 and allows the housing of the headlight, high front fender, arrows and optional screens.
It is designed to install the original tachograph.
12.3 HEADLIGHT
Cod. 1206
Fits two bulbs h11 (provided in the kit). The optical unit is the same as the R1200 R model, for high performance when driving at night. The casing is of our own production. 
It is fully adjustable and comes with all the wiring.
15 DIGITAL INSTRUMENTATION WITH SUPPORT
Cod. 1513+1514
This kit allows the mounting of the digital instrument to replace the original dashboard.
Consists of everything needed for assembly, including the mounting bracket to our beacon frames and ring for the instrument.
Computer with shell and ring black Measurements: diameter 73 mm - 41 mm height. Tachometer and speedometer up to 300 Km / h; trip odometer and total time, max speed, travel time partial and total; LCD display with two lines digital and analog bar graphs for the tachometer; LCD display with blue LED background; Storing the mileage and total mileage; Time display even when the unit is off; Setting wheel circumference adaptable to all types of wheel (1-3999mm amplitude); A measurement of speed in miles or kilometers; Waterproof body; Turn signals, lights, oil pressure indicator, neutral and motor abnormalities; Fuel gauge in bar graphs. Included in the package will speed sensor with magnet; Mounting kit and bracket all aluminum steel; Wiring with attacks waterproof tin; Assembly instructions and manual.
12.5 KIT LOW OILCOOLER
Cod. 1506
Enables the relocation of the original radiator from the front to the front of the engine.
Consists of everything you need: rubber hoses, fittings, clamps and new radiator brackets.

OPTIONAL AVAILABLE FOR KIT FRONT HEADLIGHT PRO GASTON:
12.6 FRONT FENDER
Cod. 1209AW (ALPINEWHITE)
Cod. 1209MB (MATT BLACK)
The kit offeres the front fender in two colors, pick your color in the configurator.
Following the lines of the GS 80, in a proposed finish of alpine; can be mounted easily and fastened in the special mounting points of the headlight frame Cod. 1216.
14.2 HEADLIGHT PROTECTION GRILL
Cod. 1519
For your off-road exits and travel more challenging, in perfect style on / off. Handmade in stainless steel treated with epoxy powder high strength, comes complete with everything needed for installation.
IMPORTANT Not approved for road use.

------------------------------------------------------------------
KIT FRONT HEADLIGHT BASIC Cod. 1551
This kit, much more minimal, is proposed as an alternative to the Kit Headlight PRO Cod. 1550 and allows to change the entire front part of your GS eliminating beak complete of light and move the original radiator in front of the engine.
You can transform your GS versions more radical, Scrambler or Roadster.
Compatible with models: R850GS-R1100GS-R1150GS and R1150ADV

KIT FRONT HEADLIGHT BASIC INCLUDES:
12.1 RISER HANDLEBAR
Cod. 1504
CNC cut from a single piece of high quality aluminium. Anodised in Matt Black.
12.7 SUBFRAME HEADLIGHT BASIC
Cod. 1505
Made of steel with high resistance powder coatings.
It easily mounts on riser Code 1504 and allows the housing of the headlight BASIC and of the optional windshield Hubert Cod. 1326.
In this version is not provided support for the hight fender and original instruments must be removed.
It is designed for installation support digital instrument Cod. 1513 as an alternative to the dashboard with tachograph and tachometer original.
12.8 HEADLIGHT BASIC
Cod. 1520
Headlight including lamps and wiring with excellent yield.
12.5 KIT LOW OILCOOLER
Cod. 1506
Enables the relocation of the original radiator from the front to the front of the engine.
Consists of everything you need: rubber hoses, fittings, clamps and new radiator brackets.

OPTIONAL AVAILABLE FOR KIT FRONT HEADLIGHT BASIC:
13.4 WINDSHIELD HUBERT
Cod. 1326
In flexible and durable material, despite its small size, it offers excellent shelter from the wind while maintaining a minimalist design.
Comes complete with brackets and screws, ready for easy assembly.
14.2 HEADLIGHT PROTECTION GRILL
Cod. 1519
For your off-road exits and travel more challenging, in perfect style on / off. Handmade in stainless steel treated with epoxy powder high strength, comes complete with everything needed for installation.
IMPORTANT Not approved for road use.
15 DIGITAL INSTRUMENTATION WITH SUPPORT
Cod. 1513+1514
This kit allows the mounting of the digital instrument to replace the original dashboard.
Consists of everything needed for assembly, including the mounting bracket to our beacon frames and ring for the instrument.
Computer with shell and ring black Measurements: diameter 73 mm - 41 mm height. Tachometer and speedometer up to 300 Km / h; trip odometer and total time, max speed, travel time partial and total; LCD display with two lines digital and analog bar graphs for the tachometer; LCD display with blue LED background; Storing the mileage and total mileage; Time display even when the unit is off; Setting wheel circumference adaptable to all types of wheel (1-3999mm amplitude); A measurement of speed in miles or kilometers; Waterproof body; Turn signals, lights, oil pressure indicator, neutral and motor abnormalities; Fuel gauge in bar graphs. Included in the package will speed sensor with magnet; Mounting kit and bracket all aluminum steel; Wiring with attacks waterproof tin; Assembly instructions and manual.

------------------------------------------------------------------
IMPORTANT All items are delivered complete with bolts and screws.
We reserve the right to make changes to improve the efficiency of the kit.

R 115 G/S
UnitGarage for BMW R 850-1100-1150 GS

We developed a series of accessories plug and play, reversible, interchangeable and can be purchased separately to customize and personalize your favorite GS as you like, even with a few parts, eliminating weight and without having to damage any of the original parts.

With the configurator you can create and buy the version that you like,or choose directly one of our proposals.

You will start from the combinations of stickers for the tank, and then customize your bike in enduro versions more radical, essentialy Scrambler, Basic or Classic with a touch of racing color. You can remove the "beak" and move the radiator in front of the engine, or shorten the tail with a more compact rack. Change the color of the dual seat with the covers or replace them with a long and confortable seat of our production; remove the instrument panel with a small round cockpit; leave the original instruments with our accessories or even without. Changing the original headlight with a round headlight in two options: PRO with original BMW reflector with mounting options for a hight front fender or the more classic BASIC. Simplify the tail by removing the large number plate to mount a small low taillight.

Equipped with tires TKC, you will not find obstacles even off-road .

At any time you can restore your bike in the original configuration.

You can implement your R 115 G/S with other accessories also visible in SPECIAL PARTS.
The R 115 G/S can be equipped with the original platic suitcases (see the configurator).

All the parts comes painted with everything you need for installation.

Unit has no connection with the BMW brand and / or its distributors. All products with trademarks, names or logos identifying the motorcycles are considered only as a reference to the use of accessories manufactured by us. Riff. Article. 1 a R.D. 21/06/1942 n. 929 and following.







Subscribe to our newsletter

Policy privacy

© 2016 Unitgarage | partita iva 04242270405