Kit MarraKesh K1100

KIT marraKesh for K1100
The components listed below make up the complete list to assemble the kit offered in photo based on the configuration chosen.You will find all the description and price of each product in SPECIAL PARTS,where all accessories can be purchased also separately.


4.Digital Instrument Acewell
COD. 1514+1514Sensorkit
This kit enables the installation of the digital instrument to replace the original dashboard.
Comprising everything you need for mounting . Outer shell and ring in black. Measurements: diameter 73 mm - 41 mm height. Tachometer and speedometer up to 300 km / h; odometer partial and total time, maximum speed, travel time partial and total; LCD display with two lines and a digital bar graph for analog tachometer; LCD display with white LED blue; Storage of mileage and total mileage; Time display even when the unit is off; Setting wheel circumference suitable for all types of wheel (1-3999mm amplitude); A measurement of speed in miles or kilometers; Waterproof body; Turn signals, lights, oil pressure indicator, neutral and motor abnormalities; Fuel gauge in bar graphs. Included in the package: speed sensor with magnet; Mounting kit and custom brackets for the K-series; Wiring with  waterproof connections; Installation instructions and manual.

5.Relay K Serie
COD.1814
If you read the various online forums, they will tell you that the neutral on the K series does not work with an aftermarket digital intrument. This circuit was designed by us and serves for the correct operation of the neutral warning light. Recommended if you buy the digital instrument Acewell for your special based on the K series.
dimensions relais: 16 x 16 x 45 mm ( Neutral switch, start emulation, relay ) 

6.Kit turn signal Basic
COD. 1523
The Kit contains 4 turn signals with bulb and wiring included. The front turn signals also have an orange bulb on the back.

7.Fork Gaiters
COD. 1808
High quality rubber fork gaiters, protect the forks in off-road driving,
They will fit all K models.

8.Fork Protections in neopren
COD. 1812
These 2 protection tubes in neoprene with velcro strip allow you to safeguard the forks from damages and scratches. They are assembled in minutes without any disassembly of the fork.

10.Handlebar
COD. 1613Low
Steel made, fits on the original risers.
All cables (except brake cable) should not be replaced.
Handlebar width 78 cm.

11.Tank Side Panels K75/K100
COD. 1809
Tank side panels ,left and right painted MATT BLACK.
Complete with brackets for mounting can be mounted quickly on the original hole.

12.Side Panels
COD. 1810
Pair of side panels made of ABS specifically for the K series.
Completes the whole central area of the bike and fits perfectly along our fantatic saddle (cod in 1802.)
They fit very easily with the supplied supports and fixing screws, without drilling,welding or tampering the chassis.

13.Exhaust K100
COD. 1807_100+U021SX (K100)
Great exhaust in steel and terminal in TITANIUM with removable DB Killer.
Completely hand made and TIG welded.
It sets up in minutes and allows trouble-free use of the bike with a passenger on board.
Very light and sounds fantastic. giving your three-cylinder a new life!
Comes with homologation report.
NB: The  three in one manifold in the photos below is not included, it is the original K75.

14.Frame plate holder and light
COD. 1803
This frame allows you to shorten the back frame of the bike. With this single accessory you will be able to modify the back by giving it a fantastic clean look. The repositioning of the lisence plate and the rear light (homologated) are included. It mounts quickly and is fitted with special inserts that slide into the cut frame tubes; enabling a firm attachment to the frame without the use of a welder and of course ... without having to repaint.Can be used with the original rear fender or with a more classic aluminum fender.
Included in the kit: metal frame painted ,lighthouse with bulbs, license plate in aluminum with supports for our Basic turn signals Cod. 1523 (turn signals not included).
License plate size : mm 185 x 185
The following assembly instructions

15.Tank stickers Marrakesh
COD. 1801
Couple of stickers protected with special UV film. They are modular in various ways.
and can be composed in various ways for a basic look or racing in the colors of the brand.
Compatible for the tanks of the K series but adaptable to different models.

16.Handlebar bumper
COD. 1619Brown
COD. 1619Black
Handlebar bumper in brown leather. It is very easy to install on any handlebar crossbar and protects the face in case of a crach.
Length 26cm, diameter 6cm.

17.Seat Leather, Canvas
COD. 1802Brown_Sand
COD. 1802Black_Black
Seat made of genuine high-quality leather with inserts in water-repellent canvas and handstitched in cotton thread.
The seat is very comfortable and has a base made in ABS, it is supplied with a mounting frame for models K75 and K100.
It can be quickly removed to access the underseat compartment. Total length 55cm.

18.Side Pannier Canvas + Subframe K Series
COD. U001BE_BR+1806 
COD. U001GR_BR+1806 
COD. U001BL_BR+1806 
COD. U001BL_BL+1806 
Bag made by hand in Italy in top quality waterproof rugged cotton. Treated in detail with leather trim 3 mm, simple and pure as the materials with which it was built. It attaches quickly to our subframe with the quick release system already included and mounted on the back of the bag, which is fitted with a lock to lock the bag onto the frame. Big enough to easily fit a 15" laptop, it is equipped with a large zipped pocket on the front for easy access to your phone and documents. Measurements: 32 cm Height (extendable in height up to 45 cm) width 24 cm depth 13 cm
Color :
Beige waxed canvas waterproof with brown leather trim
Black waxed canvas waterproof with brown  leather trim
Black waxed canvas waterproof with black leather trim
Green waxed canvas waterproof with brown leather trim

19.Toolbag
COD. U004BE_BR
COD. U004BL_BL
Toolbag made and hand-sewn in very strong raw cotton and leather. Reminiscent of the old R80 toolbags in size and shape; for your repairs in style.
N.B.: Tools not included

NB: FOR THE KIT THE CERTIFICATE OF APPROVAL IS NOT PROVIDED

The K 1100 is very similar to the K 100, changing only the fork and its steering bases and the front fender. So you won't find in this category the products for the front that are not plug and play for the 1100.

Unitgarage has no connection with the BMW brand and / or its distributors. All products with trademarks, names or identification codes of motorcycles are intended solely as a reference to the use of accessories of our production. Riff. art. 1a R.D. 21/06/1942 n. 929 et seq.

In order to offer you the best we constantly improve our product details. The images may refer to a previous version.
 

We thought of a kit that was easy to assemble, also usable with passenger. Even moore customizable and also reasonably inexpencive ... which is not easy when it comes to small exclusive series.
The result is fantastic, views dl live is even better than in pictures ... clean and simple with dedicated accessories: waxed canvas with leather bag with mounting frame, Ohlins properly calibrated and of longer length, end titanium exhaust all made ad- specifically for the K75 and the K100. A serie of accessories ready, interchangeable and available separately, to customize and personalize your K .

Type of tires fitted on our bike (check the measurements)
FRONT Continental TKC 80 Twinduro 4.00-18 TT 64R M/C, rear tire, symbol M+S
REAR Continental TKC 80 Twinduro 130/80-17 TT 65S symbol M+S, rear tire, M/C

Unitgarage has no connection with the BMW brand and / or its distributors. All products with trademarks, names or identification codes of motorcycles are intended solely as a reference to the use of accessories of our production. Riff. art. 1a R.D. 21/06/1942 n. 929 et seq.

In order to offer you the best we constantly improve our product details. The images may refer to a previous version.