The components listed below make up the complete list to assemble the kit as shown in the picture. You will find all the description and price of each product in SPECIAL PARTS
, where all accessories can be purchased also separately.
1. PROTECTION GRILL BASIC
For your off-road adventures and more challenging travels , you can not do without the headlight grill. Handmade in stainless steel treated with high strength epoxy powder coat, comes complete with everything needed for installation.
IMPORTANT Not approved for road use.
2. HEADLIGHT BASIC
Headlight with excellent yield including lamps and everything necessary for installation.
3. SUBFRAME HEADLIGHT BASIC
Made of steel treated with high resistance powder coating. It mounts easily and allows the housing of headlight BASIC, and the optional fairing Hubert (Cod. 1326.)
It is designed to accomodate the digital instrument (Cod. 1513 not included) as an alternative to the original dashboard.
The original key mechanism snaps perfectly into the support that we have provided.
Everything is ready for installation.
Distance of headlight bracket mm 203
NB: this product is not suitable for the K 1100 model
4. RELAY K SERIES
If you read the various online forums, they will tell you that the neutral on the K series does not work with an aftermarket digital intrument. This circuit was designed by us and serves for the correct operation of the neutral warning light. Recommended if you buy the digital instrument Acewell for your special based on the K series.
dimensions relais: 16 x 16 x 45 mm ( Neutral switch, start emulation, relay )
5. DIGITAL INSTRUMENT ACEWELL
This kit enables the installation of the digital instrument to replace the original dashboard.
Comprising everything you need for mounting . Outer shell and ring in black. Measurements: diameter 73 mm - 41 mm height. Tachometer and speedometer up to 300 km / h; odometer partial and total time, maximum speed, travel time partial and total; LCD display with two lines and a digital bar graph for analog tachometer; LCD display with white LED blue; Storage of mileage and total mileage; Time display even when the unit is off; Setting wheel circumference suitable for all types of wheel (1-3999mm amplitude); A measurement of speed in miles or kilometers; Waterproof body; Turn signals, lights, oil pressure indicator, neutral and motor abnormalities; Fuel gauge in bar graphs. Included in the package: speed sensor with magnet; Mounting kit and custom brackets for the K-series; Wiring with waterproof connections; Installation instructions and manual.
6. KIT TURN SIGNAL BASIC
The Kit contains 4 turn signals with bulb and wiring included. The front turn signals also have an orange bulb on the back.
7. FORK GAITERS
High quality rubber fork gaiters, protect the forks in off-road driving,
They will fit all K models.
8. FORK PROTECTIONS IN NEOPRENE
These 2 protection tubes in neoprene with velcro strip allow you to safeguard the forks from damages and scratches. They are assembled in minutes without any disassembly of the fork.
9. FRONT FENDER MATT BLACK
Special front fender made of composite reinforced with carbon fiber finished in Matt Black.
It comes ready for assembly with metal brackets for fastening to the fork.
Steel made, fits on the original risers. All cables (except brake cable) should not be replaced. Handlebar width 78 cm
11. HANDLEBAR BUMPER
Handlebar bumper in brown leather. It is very easy to install on any handlebar crossbar and protects the face in case of a crach.
Length 26cm, diameter 6cm.
12. TANK SIDE PANELS K75/K100
Tank side panels ,left and right painted MATT BLACK.
Complete with brackets for mounting can be mounted quickly on the original hole.
13. FRAME + WELDING MASK SK
It's been a long process, and this time we've gone even further. Suppling both the new frame and the welding mask. Complete with detailed instructions, this kit will allow you to change the entire rear of the frame; making it really short and aggressive. All the mounting brackets for the exhaust, saddle and rear grip are already welded in place, if you follow our detailed instructions, all of the parts will be easy to mount once the welding is done. Compatible with all K75 and K100 models. Only for experts or professional bike builders. Only for race / contest / not for road use
14. REAR GRIP SK
This component aesthetically completes the rear and also serves as a reinforcement for the frame.
Made of steel, with red powdercoat, and provided with finishing screws for fixing to the frame cod.1850
15. SIDE PANELS SK
Set of very light lateral side panels made out of special resin with carbon fiber reinforcements.
Are supplied painted in matte black, with clips and wellnuts to ensure easy mounting onto our frame cod 1850
16. REAR FENDER SK
Rear fender made in ABS complete with reinforced base and mounting holes on the saddle cod 1854
It is available in MATT BLACK finish, painted to perfection, makes the back of the bike really aggressive.
17. SEAT SK
Saddle handmade with genuine leather, stitched with cotton thread. We have selected the best tanneries with leather from Italian origin and not treated with pentachlorophenol. A lightweight construction due to the base in resin reinforced with carbon fiber. Provided with mounting brackets to our frame cod 1850 and fastening bushings for the rear fender.
Color: Genuine Black Leather
NOTE: Not compatible with original chassis, it was made specifically for our frame cod 1850
18. MOTORSPORT STICKERS SK
Pair of stickers with special UV-resistant film; They are pre-spaced and also applicable in part, for example only the writing or only the logo.
In this version the original logo remains visible (BMW logo not included)
Stickers can be applied on a painted tank or below the transparent coat.
19. PLATE HOLDER LOW SK
Made of black steel tubes with epoxy powdercoat complete with plate holder in aluminum with mounting brackets for our Basic turn signals Cod. 1523 (turn signals not included.)
Mounts a minimal round headlight with chrome ring (including bulbs) It is fixed to the rear suspension mounting bolt and the brake caliper, you can significantly change the character and style of the rear of the bike. number plate size: 185 x 185 mm. Also compatible with the bike in the original configuration. For all K models K75 or K100
20. SPARK PLUG CABLES SK
Set of 4 red spark plug cables. Pre-cut at the right length for the relocation of the coils from the original position to under the saddle. Complete with rubber spark plug caps.
Nb: the connectors to the coils must be removed either from the original cables or ordered as a spare part from an official dealership providing the frame number of your bike.
21. OHLINS SUSPENSION K SERIES
OHLINS Shock S 46
Dedicated to all K models, it allows you to raise the back of your bike.
Adjustable compression and rebound damping with variable from 378 mm to 386 mm.
Adjustable spring preload with millimetric ring. Great looks and performance.
22. SUPPORT REAR SUSPENSION K SERIES
The original mounting point for the rear sus
pension is placed at the back of the shaft drive.
This beautiful part, CNC-milled out of solid aluminum, will allow you to advance the mounting of our K series Ohlins cod 1811
The end result is fantastic, following the angle of the frame.
23. COMPLETE HOMOLOGATED EXHAUST SK
Fantastic exhaust specially made for the sKrambler. Headpipes equipped with engine mounting flanges from billet alu (CNC) Pipes and joints made of stainless steel, terminal in TITANIUM with removable DB Killer. Made entirely by hand and Tig welded (to perfection). Lightweight and fantastic sound gives your four-cylinder a new life ...
NB: Comes with full homologation report.
Compatibile with all models: K100