DEUS STREET FULL KIT WHITE

The 'STREET' Kit is the road setup according to Deus Ex Machina, which signs the timeless silhouette of the /7 tank with a new graphic design and offers its own 'selection' of the Unit Garage range to transform your nineT into a unmistakable icon of the road.

The comfort and handling of your motorbike will improve considerably. The tank is shorter to be able to move forward and load the front end better. You will no longer have the strange sensation of distance from the handlebars, the riding feeling changes for the better. The kit parts are supplied painted and ready for assembly.

The kit includes:
0. Box with video assembly instructions + screws and supports
1. Tank
2. Saddle
3. Pair of side panels
4. Ergo handlebar
5. Handlebar Ends
6. Handlebar bumpers
7. Air intake cover
8. Low muffler
9. Low aluminum mudguard
10. Fender extensions
11. Passenger handle
12. Fork protectors
13. Pair of stainless steel manifold covers
14. Low license plate holder
15. Rear light support plate
16. Side Frame and bag

1. Tank:
Code: 2902
The tank cap and fuel pump remain the original ones of your motorbike, the reserve light will still work, you will not have to tamper with anything, the kit is completely reversible. The nylon tank is supplied painted complete with transparent stickers. The original activated carbon filter (canister) remains the original one. All supports for fixing the tank are supplied in the kit. The capacity is 18.5 litres, the nineT/7 Unit garage tank weighs 2 kg less than the original one.
NB: TÜV approved

2. Seat:
Code: 1654BO
this seat recalls the classic style and BMW colours. The nineT's OEM seats are certainly not very comfortable. We created a molded plastic bottom and a high quality ergonomic foam with GEL insert, the result is fantastic! Two-seater saddle produced in Italy with handmade stitching, taped inside and Sky finish. Much more comfortable than the original for both the rider and the passenger, it can be mounted without any modification to the motorbike as it is hooked and fixed in the same position as the original one. It fits on all nineT models.

3. Side covers:
Code: 2912
they are molded in ABS, with a matt black finish. They are supplied complete with fixing brackets, screws and vibration dampers.

4. nineT Ergo handlebar:
Code: 1613Ergo+ADP
For the nineT we wanted an "Old School" handlebar with crossbar and constant diameter (22mm).
The bike becomes truly aggressive with a more relaxing riding position.
Made of steel with a matt black epoxy powder finish, it is supplied with everything needed for mounting on the original risers and controls.
NB: The 1613 Ergo handlebar has the same height as the original one but with a more comfortable bend. (see measurements in the sheet)
Compatible with heated grips.

5. Handlebar ends:
Code: 2x2024
Pair of CNC made handlebar ends with glossy black finish and Unit garage logo. The two M12 fixing screws are included

6. Bumpers:
Code: 1404O
Classic Off Road bumper with Unit garage logo, it mounts very easily and protects the face from the handlebar crosspiece in the event of a fall.

7. Air intake cover:
Code: 2905BL
Carter made of aluminum for the air intake of the nineT. The original plastic is reused, and it is not necessary to drill or tamper with anything.

8. Low Muffler:
Code: 1611Low
Approved titanium muffler and stainless steel fitting worked entirely by hand, in perfect moto gp style. It weighs approximately 3.4 kg less than the original one and has the removable DB-Killer. It can be easily assembled in just a few minutes.

9. Low aluminum mudguard:
Code: 1637BL - 1603BL
Replaces the entire original front mudguard, in perfect "old school" style; matt black epoxy powder finish.

10. Fender Extensions:
Code: 2x1627
This fender extension made of ABS offers good protection for the engine and exhaust system against stone chips, and splashes of water.
It can be fixed with the supplied screws or with rivets on both the front and rear of the mudguard.

11. Passenger handle:
Code: 1605
Made of steel with a matt black epoxy powder finish. In addition to being very useful for the passenger, it finishes the entire rear part in a fantastic way, it can also be used to secure bags or luggage rack straps.

12. Neoprene Fork Protectors:
Code: -
These neoprene protectors with velcro fastening allow you to safeguard the fork sliders and finish the part between the triple clamps. They can be assembled in a few minutes without dismantling the fork.

13. Pair of stainless steel manifold covers:
Code: 1681inox
Pair of satin stainless steel intake manifold covers, right and left, with Unit garage logo. They can be assembled quickly without dismantling anything, just press them onto the original rubber tubes.

14. Low license plate holder:
Code: 1610
Made of steel tube with matt black epoxy powder finish complete with aluminum license plate holder with supports for original or aftermarket indicators (indicators not included.) It is supplied with LED license plate light. The wiring extension for the headlight and indicators is included, the wire passes inside the tube. License plate holder dimensions: 187 x 187 mm. It is fixed to the telelever and allows you to significantly modify the character and style of the motorbike.
NB: The low license plate holder is not compatible with aluminum bag frames with rear crossbar.

15. Rear light support plate:
Code: 1604
Made of aluminum with a matt black finish, it allows the OEM headlight to be mounted under the frame and the entire original license plate support to be eliminated.

NB: In some countries such as the United States and Canada BMW fits a larger "Highline" headlight which makes the rear part of the nineT very heavy. If you have the Highline rear light and want to use this accessory you will need the related light code: 1692.

16. TPU Khali Bag Side Frame:
Code: UG001+1620
Khali side bag complete with 100% waterproof quick coupling
It quickly attaches to our bag frames with the quick release system COD.U000 already included and mounted on the back of the bag, which is equipped with a lock for locking on the frame itself. It can house a 15" laptop inside and is equipped with a large waterproof pocket.

Materials: High frequency heat-welded TPU with Hypalon finishes.
- TPU is the latest generation material that makes PVC obsolete , it is a composite material with excellent elasticity, toughness, wear resistance, and is not toxic
- Hypalon is an extremely technological, durable material, with excellent waterproof capabilities, resistant to atmospheric agents, chemicals and UV rays.

- Roll Up closure which guarantees waterproofness
- Magnetic buckles
- Reflective inserts for greater visibility
- Straps equipped with a Velcro system to fix the excess part
- Reinforced rigid back with attachment to the frame already included
- Straps with quick hooks
- Shoulder strap and handle included

Height 38 cm, extendable in height up to 48 cm, width 30 cm, depth 18 cm.
20L - 26L
1.25kg

Frame made of treated steel with a matt black epoxy powder finish.
It mounts on the right side of the motorcycle. Designed for the NineT series, it integrates perfectly with the rest of the bike. Ready to accommodate our quick attachment system, beautiful and minimal even when the bag is not mounted.

NB To obtain the same aesthetic result on all R nineT versions, the kit may vary slightly in price and components based on the motorcycle selected

Compatible with all nineT models, it is supplied complete with everything needed for assembly. Video instructions included.

To offer you the best, we constantly improve our products in detail. The images may refer to a previous version.