DEUS ENDURO BASIC KIT WHITE

Deus Ex Machina and Unit Garage know off-roading well, so the 'Enduro' kit is a product that could not be missing from this collaboration. For this setup dedicated to dirt lovers, Deus has selected a range of products that give the nineT a clean and aggressive look, choosing to celebrate the 'machine' with an iconic livery that offers its tribute to the off-road history of the propeller.

The comfort and handling of your motorbike will improve considerably. The tank is shorter to be able to move forward and load the front end better. You will no longer have the strange sensation of distance from the handlebars, the riding feeling changes for the better. The kit parts are supplied painted and ready for assembly.

The kit includes:
0 Box with video assembly instructions + screws and supports
1 Fuel Tank
2 Front Mudguard
3 Rear mudguard with license plate holder kit
4 Pair of side panels
5 Ergo handlebar
6 Handlebar Ends
7 Handlebar Bumpers
8 Number plate with quick release
9 Side Frame and bag

1. Fuel tank NineT Paris Dakar:
Code: 2402
The fuel tank in Nylon re-uses the original fuel cap and fuel pump of your original bike, the reserve light will still work, and you will not have to tamper with anything, the kit is completely reversible. The fuel tank comes in the Light white of the Urban GS with stickers under a transparant finish. The original active coal filter (canister) remains the same of your original bike. The tank is shorter to allow you to get closer to the handlebars and load the front better. You will no longer have the strange distant feeling from the handlebars, but feel increased control over the bike.

The capacity is 22.5 litres, which if we calculate an average consumption of 17.7 km/litre will allow a range of 400 km ... more than enough to travel around the world! The nineT Paris Dakar tank weighs 1.7 kg less than the original one. The tank is painted, complete with graphics and ready to be assembled. All mounting brackets are supplied. Compatible with all nineT models. Video instructions included. The tank can be mounted with the original seat.
NB: TÜV approved

2. Front fender:
Code: -
High fender kit made of ABS with Light White paint with transparent finish. It can be mounted without any modification to the motorbike, it is supplied complete with instructions, brackets and screws for fixing. It replaces the original one, making the front much more aggressive .

3. Rear mudguard with license plate holder kit:
Code: 1651LW+1694
Rear mudguard in ABS, complete with everything needed for assembly. It goes perfectly with the design of the motorbike. Aluminum license plate holder designed for the original headlight . Completely modular, the license plate support or indicator supports are included but can be dismantled if you want to position the indicators or license plate in another way. The electrical wiring is plug and play, all the original electrical connections are reused, no welding or modifications to the original wiring are necessary. Stainless steel screw kit included.

Original LED indicators and headlight not included.

NB: In some countries such as the United States and Canada BMW fits a larger "Highline" headlight which makes the rear part of the NineT very heavy. If you have the Highline rear light and want to use this accessory you will need the related light code: 1692.

4. Side covers:
Code: 2912
they are molded in ABS, with a matt black finish. They are supplied complete with fixing brackets, screws and vibration dampers.

5. NineT Ergo Handlebar:
Code: 1613Ergo+ADP
For the nineT we wanted an "Old School" handlebar with crossbar and constant diameter (22mm).
The bike becomes truly aggressive with a more relaxing riding position.
Made of steel with a matt black epoxy powder finish, it is supplied with everything needed for mounting on the original risers and controls.
NB: The 1613 Ergo handlebar has the same height as the original one but with a more comfortable bend. (see measurements in the sheet)
Compatible with heated grips.

6. Handlebar ends:
Code: 2x2024
Pair of CNC made handlebar ends with glossy black finish and Unit garage logo. The two M12 fixing screws are included

7. Bumpers:
Code: 1404Blue
Classic Off Road bumper with Unit garage logo, it mounts very easily and protects the face from the handlebar crosspiece in the event of a fall.

8. Number plate with quick release:
Code: U075
Our bag frames are very minimal, but if you don't want to leave the frame visible when you are not using the bags, we have designed this table with quick release and lock. It incorporates the regulatory measurements of the number plate used at the Paris Dakar. It is supplied complete with supports and screws, and is equipped with a lock for locking on our frames dedicated to the different motorcycle models.
In a few seconds you unhook the bag and replace it with the number plate.

9. TPU Khali Bag Side Frame:
Code: UG001+1620
Khali side bag complete with 100% waterproof quick coupling
It quickly attaches to our bag frames with the quick release system COD.U000 already included and mounted on the back of the bag, which is equipped with a lock for locking on the frame itself. It can house a 15" laptop inside and is equipped with a large waterproof pocket.

Materials: High frequency heat-welded TPU with Hypalon finishes.
- TPU is the latest generation material that makes PVC obsolete , it is a composite material with excellent elasticity, toughness, wear resistance, and is not toxic
- Hypalon is an extremely technological, durable material, with excellent waterproof capabilities, resistant to atmospheric agents, chemicals and UV rays.

- Roll Up closure which guarantees waterproofness
- Magnetic buckles
- Reflective inserts for greater visibility
- Straps equipped with a Velcro system to fix the excess part
- Reinforced rigid back with attachment to the frame already included
- Straps with quick hooks
- Shoulder strap and handle included

Height 38 cm, extendable in height up to 48 cm, width 30 cm, depth 18 cm.
20L - 26L
1.25kg

Frame made of treated steel with a matt black epoxy powder finish.
It mounts on the right side of the motorcycle. Designed for the NineT series, it integrates perfectly with the rest of the bike. Ready to accommodate our quick attachment system, beautiful and minimal even when the bag is not mounted.

NB To obtain the same aesthetic result on all R nineT versions, the kit may vary slightly in price and components based on the motorcycle selected

Compatible with all nineT models, it is supplied complete with everything needed for assembly. Video instructions included.

To offer you the best, we constantly improve our products in detail. The images may refer to a previous version.