DEUS ENDURO FULL KIT WHITE

Deus Ex Machina and Unit Garage know off-roading well, so the 'Enduro' kit is a product that could not be missing from this collaboration. For this setup dedicated to dirt lovers, Deus has selected a range of products that give the nineT a clean and aggressive look, choosing to celebrate the 'machine' with an iconic livery that offers its tribute to the off-road history of the propeller.

The comfort and handling of your motorbike will improve considerably. The tank is shorter to be able to move forward and load the front end better. You will no longer have the strange sensation of distance from the handlebars, the riding feeling changes for the better. The kit parts are supplied painted and ready for assembly.

The kit includes:
0. Box with video assembly instructions + screws and supports
1. Fuel Tank
2. Front mudguard
3. Pair of side panels
4. Ergo handlebar
5. Handlebar Ends
6. Handlebar bumpers
7. Number plate with quick release
8. Muffler
9. Muffler Support
10. Blue Solo Seat
11. License plate holder
12. 'Heavy duty' crash bars
13. Skid plate
14. Fork Protectors
15. Stainless steel manifold casing
16. Side Frame and bag


1. Fuel tank NineT Paris Dakar:
Code: 2402
The fuel tank in Nylon re-uses the original fuel cap and fuel pump of your original bike, the reserve light will still work, and you will not have to tamper with anything, the kit is completely reversible. The fuel tank comes in the Light white of the Urban GS with stickers under a transparant finish. The original active coal filter (canister) remains the same of your original bike. The tank is shorter to allow you to get closer to the handlebars and load the front better. You will no longer have the strange distant feeling from the handlebars, but feel increased control over the bike.

The capacity is 22.5 litres, which if we calculate an average consumption of 17.7 km/litre will allow a range of 400 km ... more than enough to travel around the world! The nineT Paris Dakar tank weighs 1.7 kg less than the original one. The tank is painted, complete with graphics and ready to be assembled. All mounting brackets are supplied. Compatible with all nineT models. Video instructions included. The tank can be mounted with the original seat.
NB: TÜV approved

2. Front fender:
Code: -
High fender kit made of ABS with Light White paint with transparent finish. It can be mounted without any modification to the motorbike, it is supplied complete with instructions, brackets and screws for fixing. It replaces the original one, making the front much more aggressive .

3. Side covers:
Code: 2912
they are molded in ABS, with a matt black finish. They are supplied complete with fixing brackets, screws and vibration dampers.

4. nineT Ergo handlebar:
Code: 1613Ergo+ADP
For the nineT we wanted an "Old School" handlebar with crossbar and constant diameter (22mm). The bike becomes truly aggressive with a more relaxing riding position. Made of steel with a matt black epoxy powder finish, it is supplied with everything needed for mounting on the original risers and controls.

NB: The 1613 Ergo handlebar has the same height as the original one but with a more comfortable bend. (see measurements in the sheet)
Compatible with heated grips.

5. Handlebar ends:
Code 2x2024
Pair of CNC made handlebar ends with glossy black finish and Unit garage logo. The two M12 fixing screws are included

6. Bumpers:
Code 1404Blue
Classic Off Road bumper with Unit garage logo, it mounts very easily and protects the face from the handlebar crossbar in the event of a fall.

7. Number plate with quick release:
Code: U075
Our bag frames are very minimal, but if you don't want to leave the frame visible when you are not using the bags, we have designed this table with quick release and lock. It incorporates the regulatory measurements of the number plate used at the Paris Dakar. It is supplied complete with supports and screws, and is equipped with a lock for locking on our frames dedicated to the different motorcycle models.
In a few seconds you unhook the bag and replace it with the number plate.

8. High muffler:
Code: 1611High
For the nineT we wanted a special exhaust, but one that was perfectly approved for road use! Stainless steel fitting with titanium terminal worked entirely by hand, in perfect moto gp style.
It weighs approximately 2.8 kg less than the original one and has the removable DB-Killer. The sound will drive you crazy and the delivery... too!

9. Muffler Support:
Code: -
Exhaust support made of steel with matt black finish. Necessary when removing the passenger frame, it allows the fixing of our BMW nineT exhausts

10. Blue solo seat:
Code: 1602Blue
Single-seater saddle made by us, much more comfortable and minimal, can be mounted without any modification to the motorbike as it is hooked and fixed in the same position as the original one. The result is fantastic but also very clean and elegant.

Handle:
Made of steel with a matt black epoxy powder finish
In addition to being very useful for moving the bike when stationary, it finishes the entire rear part in a fantastic way.

Fender:
ABS rear mudguard complete with fixing bracket and vibration dampers.
It fits perfectly with the back of the motorbike.

11. License plate holder:
Code: 1630
The rear plastic bothered us, we wanted to aesthetically recreate continuity with the tube passenger frame: the result is fantastic, once assembled it is one with the rest of the bike. Made of black epoxy powder painted steel tube complete with aluminum license plate holder with housing ready to house the original headlight. It attaches to the frame very simply and allows you to significantly change the character and style of the motorcycle at the rear by shortening and raising the license plate and headlight. Complete with supports for original or aftermarket indicators (indicators not included) and everything needed for assembly.
License plate holder dimensions: 187 x 187 mm

12. 'Heavy Duty' crash bars:
Code: 1691
To best protect your boxer this is the bar you need. With double side protection tube it is very protective in the event of a fall and integrates perfectly with the R nineT frame. Made of steel with 25 mm tube, 2 mm thick, treated with high-resistance powder paints. Most maintenance work can be performed without dismantling the boom. Very beautiful and elegant, they perfectly define the lines of the motorbike.

NB: Compatible with aftermarket or OEM cylinder head covers and protectors.

13. Skid Plate:
Code: 1407_
Engine guard in anodized aluminium. Protects the engine and muffler manifolds off-road.
Built in 3 mm Peraluman light alloy, it is cold pressed and embossed with drain holes: the pronounced ribs to strengthen it are combined with extremely simplified attachments. It is larger than the original model and is shaped to protect the exhaust manifolds in the front part and in the most exposed area of the catalyst.

14. Neoprene Fork Protectors:
Code: -
These 2 neoprene protectors with velcro fastening allow you to safeguard the fork sliders and finish the part between the triple clamps. They can be assembled in a few minutes without dismantling the fork.

15. Pair of stainless steel manifold covers:
Code: 1681inox
Pair of satin stainless steel intake manifold covers, right and left, with Unit garage logo. They can be assembled quickly without dismantling anything, just press them onto the original rubber tubes.

16. TPU Khali Bag Side Frame:
Code: UG001+1620
Khali side bag complete with 100% waterproof quick coupling
It quickly attaches to our bag frames with the quick release system COD.U000 already included and mounted on the back of the bag, which is equipped with a lock for locking on the frame itself. It can house a 15" laptop inside and is equipped with a large waterproof pocket.

Materials: High frequency heat-welded TPU with Hypalon finishes.
- TPU is the latest generation material that makes PVC obsolete , it is a composite material with excellent elasticity, toughness, wear resistance, and is not toxic
- Hypalon is an extremely technological, durable material, with excellent waterproof capabilities, resistant to atmospheric agents, chemicals and UV rays.

- Roll Up closure which guarantees waterproofness
- Magnetic buckles
- Reflective inserts for greater visibility
- Straps equipped with a Velcro system to fix the excess part
- Reinforced rigid back with attachment to the frame already included
- Straps with quick hooks
- Shoulder strap and handle included

Height 38 cm, extendable in height up to 48 cm, width 30 cm, depth 18 cm.
20L - 26L
1.25kg

Frame made of treated steel with a matt black epoxy powder finish.
It mounts on the right side of the motorcycle. Designed for the NineT series, it integrates perfectly with the rest of the bike. Ready to accommodate our quick attachment system, beautiful and minimal even when the bag is not mounted.

NB To obtain the same aesthetic result on all R nineT versions, the kit may vary slightly in price and components based on the motorcycle selected

Compatible with all nineT models, it is supplied complete with everything needed for assembly. Video instructions included.

To offer you the best, we constantly improve our products in detail. The images may refer to a previous version.